#+TITLE: gitzone
#+AUTHOR: tg(x)
#+OPTIONS: ^:{}
#+INFOJS_OPT: view:showall ltoc:nil
#+STYLE: <style>html{max-width:1000px}</style>

#+LATEX_HEADER: \usepackage{lmodern}
#+LATEX_HEADER: \usepackage{fullpage}

* About

Gitzone is a git-based zone file management tool for BIND. Users can update
their zones in a git repository then during a push the zone files are checked,
updated & reloaded from git receive hooks. If there's an error in a file being
pushed then the push is rejected, thus only correct files are stored on the
server. Gitzone is written in Perl.

Gitzone-shell is similar to git-shell but it restricts the user to the
zones repository and provides some additional commands for dynamic DNS
updates & SSH key management.
#+LATEX: \pagebreak


* Installation (semi-automatic)

First install Bind9 (not covered by this documentation).

Then install all scripts in the prefix /bin path and /libexec

: # make install

Once the binaries are in place, to enable gitzone for a user there is
a relatively simple script: gitzone-install. Usage synopsis:

: # gitzone-install username id_rsa.pub

This script assumes that a user with 'username' (first argument)
already exists: anyone with access to this user will be in control of
gitzone, since access is managed via ssh authentication.

Second argument is the first public ssh key which will have write
permissions to change zones (more keys can be added later).

If you intend to use the dynamic DNS feature via the gitzone-shell,
then you'd better create a specific user only for gitzone.

Once ready, run the script with all the arguments in place.

Then create /etc/bind/repos/${user}.conf and put inside:

#+BEGIN_EXAMPLE
zone "domain.com" {
type master;
notify yes;
file "/var/cache/bind/$user/domain.com";
allow-transfer { transfer; };
};
#+END_EXAMPLE

Where 'domain.com' is the first domain you are managing with
gitzone. There can be more domains and for each of them the above
configuration section must be created.

Now clone the gitzone repository from another user that has access to
the ssh secret key configured in gitzone-install. The git url will be
composed of the hostname of the machine where is has been installed
and the username chosen:

: git clone username@ns.myown.net:zones/username gitzone-admin

The command above will clone the new gitzone repository into a
directory gitzone-admin. If you aren't familiar with git, this is a
good time to go study it.

Create a file named 'domain.com' inside gitzone-admin and fill it in
as a canonical DNS zone file for bind9. Then add, commit and push:

#+BEGIN_EXAMPLE
cd gitzone-admin; vim domain.com
(edit the zone file according to bind9 documentation)
git add domain.com
git commit -m "initial zone commit for domain.com"
git push
#+END_EXAMPLE

If the domain.com file contains any errors, gitzone will not accept
the push and will report an error among the screen messages.


If all went well, restart the bind9 daemon and you'll see that the
zone for domain.com is served by your new DNS. One can check using
nslookup.

Gitzone can be installed on multiple users on the same machine,
this way there can be different admins (or groups of admins)
for different zones all on the same machine.

* Installation (in close detail)

- set PREFIX in Makefile and make sure the paths in the hooks are correct, then
: # make install

- edit path settings in gitzone-shell

- create users with ssh access and set their shell to gitzone-shell

- create a zones repo for each user and set receive.denyCurrentBranch to ignore,
this allows pushing to a checked out repository. The checked out files are
used for incrementing serials and validating the zones with named-checkzone.
: # mkdir -p ~$user/zones
: # cd ~$user/zones
: # git init $user
: # cd $user
: # git config receive.denyCurrentBranch ignore
: # cd .git/hooks
: # ln -s /usr/libexec/gitzone/pre-receive
: # ln -s /usr/libexec/gitzone/post-receive

- if you want to use a repository locally add these hooks as well / instead:
: # ln -s /usr/libexec/gitzone/pre-commit
: # ln -s /usr/libexec/gitzone/post-commit

- create a .gitconfig for each user that contains user name & user email (used
for auto increment commits):
: # git config -f ~$user/.gitconfig user.name $user
: # git config -f ~$user/.gitconfig user.email "$user@ns.example.com"

- add ssh keys to ~$user/.ssh/authorized_keys and enable ssh key editing if desired:
: # touch ~$user/.ssh/authorized_keys_edit_allowed

- make sure the user's HOME directory has correct permissions:
: # chown -R $user:users ~$user

- edit the settings in gitzone.conf

- create a directory for each user in $zone_dir and chown them to the users, this
will contain a clone of the user's repository, the zone files here should be
included in named.conf.
: # cd $zone_dir
: # mkdir $user
: # chown $user:$group $user

- edit named.conf
- set directory in options to $zone_dir, this is needed to make relative file
names work in $INCLUDE:
: options {
: directory "/var/named";
: // ...
: }

- put user zone configuration in a separate file for each user and include them:
: include "/etc/bind/repos/user1.conf";
: include "/etc/bind/repos/user2.conf";
: include "/etc/bind/repos/user3.conf";

* Usage

** Git repository

To make changes to the zones you need to clone the git repository, edit the
files, commit the changes and finally push the changes to the server. If you
use the auto increment feature you also need to pull after a push as the receive
hooks on the server make commits to the repository during a push.

#+BEGIN_EXAMPLE
% git clone ns.example.net:zones/$user zones
% # or if you're using gitzone-shell you can use any path:
% git clone ns.example.net:zones
% cd zones
% # edit files
% git add .
% git commit -m 'commit msg'
% git push origin && git pull
#+END_EXAMPLE

** SSH commands

The following SSH commands are provided by gitzone-shell:

- =update-record <filename> <record>=: updates the IP address of the first matched
record in the given file to the SSH client's IP address.
: % ssh ns.example.net update-record example.net somehost IN A

- SSH key management commands, to use these do:
: touch .ssh/authorized_keys_edit_allowed
in the users' home directories.

- =list-keys=: list added ssh keys
: % ssh ns.example.net list-keys

- =add-key=: add a new ssh key
: % ssh ns.example.net add-key `cat id_rsa.pub`

or only allow one specific command:
: % ssh ns.example.net add-key 'command="update-record example.net somehost IN A"' `cat id_rsa.pub`

- =del-key=: delete an ssh key from the config
: % ssh ns.example.net del-key user@somewhere

** Dynamic DNS

In order to do automatic dynamic DNS updates, create an SSH key without a
password and use the add-key command to add it with a command= parameter which
has an update-record command in it, see the example in the previous
section. This way the host doing the updates does not have access to the git
repository as it is restricted to the specified command only. Then all you have to do to
update your IP is:
: % ssh ns.example.net

Run this command whenever the IP changes or the interface comes up.

*** Debian, Ubuntu

On Debian-like systems you can use a post-up command in =/etc/network/interfaces=.

*** Gentoo

On Gentoo you can put a postup() function in =/etc/conf.d/net=.

** Zone files

There are a few keywords you can use in the zone files:

- ;AUTO_INCREMENT after a serial number to automatically increment it during
a push. If the number is 10 digits and starts with 20 it's treated as a date.
e.g.:
: example.net. IN SOA ns1.example.net. hostmaster.example.net. (
: 2011013101 ;AUTO_INCREMENT
: 1d 2h 4w 2d )

- $INCLUDE can be used to include other files from the repository, the file
names should be prefixed with the user name

- ;INCLUDED_BY on the first line of a file indicates what other files include
this file. When this file is committed & pushed all the other files listed
after ;INCLUDED_BY are reloaded as well.

E.g. if you have the following files in the repository then a change in
example-common would result in the reload of both example.net & example.org:

- example.net:
: ...
: $INCLUDE username/example-common example.net.

- example.org:
: ...
: $INCLUDE username/example-common example.org.

- example-common:
: ;INCLUDED_BY example.net example.org
: ...

* Acknowledgements

Gitzone is copyright (C) 2013-2019 by Dyne.org foundation, Amsterdam

Designed and written by tg(x)

Maintained and documented by Denis Roio and Ivan J.

With contributions by Zephaniah Loss-Cutler-Hull

Gitzone is Licensed under the terms of the Affero GNU Public License
as published by the Free Software Foundation; either version 3 of the
License, or (at your option) any later version.

Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
implied. See [the License](LICENSE.txt).